Cooltech™ Vacuum Pump - Capacity 93 l/min
Suitable for 230 V and 115 V, with IEC connector and EU 230 V power cord.
Specifications RA 15401 - 4 CFM
| Capacity | 93 l/min |
| No. of Stages | 2 |
| Ultimate Vacuum | 20 Microns |
| Intake Fittings | 1/4" MFL + 1/2" MFLT + 3/8 MFL |
| Oil Capacity | 445 ml (15 oz) |
| Motor Size | 244 W (1/3 HP) |
| Power Supply | 115 V, 60 Hz / 230 V, 50 Hz |
| Weight | 12 kg (27 lbs) |
| Dimensions | 24,7 x 14,25 x 42 cm |
The Importance of Deep Vacuum
The purpose of a vacuum pump is to remove moisture and air from an A/C-R system. Modern systems are built tighter and charges are more critical. That means these systems have a greater sensitivity to moisture and other contaminants, making thorough evacuation more important than ever before. Moisture in a refrigeration system, directly or indirectly, is the cause of most problems and complaints. First, moisture can cause a freeze-up in a system. Moisture is picked up by the refrigerant and transported through the refrigerant line in a fine mist, with ice crystals forming at the point of expansion.
A "freeze-up" is not the only problem caused by moisture. It can also result in corrosion, the effects of which are not apparent until the real damage has occurred. Moisture alone is bad enough, but combined with refrigerants containing chlorine, hydrochloric acids can form. These greatly increase the corrosion of metals.
Also, refrigerant oil rapidly absorbs moisture. Water-formed acids combine with the refrigerant, forming a closely bonded mixture of fine globules. The effect is called sludging and it greatly reduces the lubricating ability of the oil. A vacuum pump removes troublesome moisture by lowering the pressure within the system and vaporizing (or boiling off) the moisture, then exhausting it along with air.
| Item | Description | Part |
| 1 | Oil Drain Cap (6) | RA 40572 |
| 3 | Module Cover Kit | RA 15337 |
| 4 | Oil Fill Cap | RA 15371 |
| 8 | Intake Fitting (includes No. 9, 10) | RA 15364 |
| 11 | Vent Bolt (includes O-Rings) | RA 15338 |
| 12 | Handle, Power Cord and Switch Assembly (230 V) | RA 15466 |
| 13 | Motor for RA 15401 | RA 116214 |
| 13 | Motor for RA 15601 | RA 116214 |
| 13 | Motor for RA 15121A | RA 118638 |
| 14 | Coupling | RA 13192 |
| 15 | Iso-Valve™ Assembly | RA 15368 |
| 16 | Base and Foot Assembly | RA 15369 |
| 17 | Pump Assembly, less motor | RA 15547 |
| 17 | Pump Assembly, less motor | RA 15548 |
| 17 | Pump Assembly, less motor | RA 15144 |
| -- | Seal Replacement Kit (not show) | RA 15367 |
| -- | Filter (only RA 15121A) | RA 15147 |
- RA 15401 Manual (476.05 KB)