RA 15601
Cooltech™ Vacuum Pump – Capacity 142 l/min
Suitable for 230 V and 115 V, with IEC connector and EU 230 V power cord.
Specifications RA 15601 - 6 CFM
|
Capacity |
142 l/min |
|
No. of Stages |
2 |
|
Ultimate Vacuum |
20 Microns |
|
Intake Fittings |
1/4" MFL + 1/2" MFLT + 3/8 MFL |
|
Oil Capacity |
445 ml (15 oz) |
|
Motor Size |
366 W (1/2 HP) |
|
Power Supply |
115 V, 60 Hz / 230 V, 50 Hz |
|
Weight |
12 kg |
|
Dimensions |
24,7 x 14,25 x 42 cm |
Documents
Manual - RA 15401 (82 downloads )Spare Parts
Item
Description
Part Number
1
Oil Drain Cap (6)
RA 40572
3
Module Cover Kit (includes No. 1, 2, 4, 5)
RA 15337
4
Oil Fill Cap
RA 15371
8
Intake Fitting
RA 15364
11
Vent Bolt (includes O-Rings)
RA 15338
12
Handle, Power Cord and Switch Assembly
RA 15466 230 V
13
Motor for RA 15401
RA 116214 115 V/230 V
14
Coupling
RA 13192
15
Iso-ValveTM Assembly
RA 15368
16
Base and Foot Assembly
RA 15369
17
Pump Assembly, less motor (incl. 3 & 6) for RA 15601
RA 15548
—
Seal Replacement Kit (not show)
RA 15367
Parts List
Parts List
Item
Description
1
Oil Fill Port –
Makes adding oil simple since the port is accessible from the front or either side. The sight glass on the front of the pump shows you when enough oil has been added.
Makes adding oil simple since the port is accessible from the front or either side. The sight glass on the front of the pump shows you when enough oil has been added.
2
Heavy-Duty Motor –
High torque design for easy startup and
efficient operation.
High torque design for easy startup and
efficient operation.
3
Offset Rotary Vanes –
Our proven design builds a powerful compression within the pumping chamber to reduce system pressure and vaporize moisture so it can be exhausted along with air.
Our proven design builds a powerful compression within the pumping chamber to reduce system pressure and vaporize moisture so it can be exhausted along with air.
4
Molded Base –
Durable polycarbonate base improves pump balance and minimizes vibration during operation.
Durable polycarbonate base improves pump balance and minimizes vibration during operation.
5
Gas Ballast –
Moisture laden air passing through the pump mixes with relatively dry air to such a degree that compression does not cause condensation.
Moisture laden air passing through the pump mixes with relatively dry air to such a degree that compression does not cause condensation.
6
Iso-Valve™ –
Isolates the pump from the system with just a quarter-turn.
Isolates the pump from the system with just a quarter-turn.
7
Die-Cast Aluminium Housing –
Cast aluminium housings make the pumps lightweight but durable.
Cast aluminium housings make the pumps lightweight but durable.
8
Two Stage Design –
Cleans the system more thoroughly than a single-stage pump; the second stage starts pumping at a lower pressure so you can pull a deeper, ultimate vacuum.
Cleans the system more thoroughly than a single-stage pump; the second stage starts pumping at a lower pressure so you can pull a deeper, ultimate vacuum.
9
Oil Drain Valve –
Positioned at the bottom of the oil reservoir and angled for faster, more complete draining.
Positioned at the bottom of the oil reservoir and angled for faster, more complete draining.
